Intel SR870BN4 - Server Platform - 0 MB RAM Product Manual page 102

Enter/Verify New Password
These edit boxes allow the user to enter the password for the user. The Verify New Password edit
box ensures that the password entered in the Enter New Password edit box is correct. As a user
enters a password, asterisks are displayed. If a password already exists, these fields show
******** when the user enters this screen.
This password can be between 1 and 16 ASCII characters in length. The characters accepted by the
SMU for user passwords are the ASCII printable characters in the range 0x21 through 0x7e, except
for left and right bracket characters ( [ and ]), since those characters are used for framing packets
for terminal mode sessions.
Note that if the Clear Password check box is checked, these two edit boxes are disabled.
If a user password is currently set, the SMU user is not required to enter the current password
before changing it.
User Privilege Level for LAN Channels
This combo box allows the user to select the privilege level for the LAN channel. The global
privilege level set for the LAN channel access takes precedence over the user privilege level. For
example, if the LAN channel is configured for user access only, then users are limited to user
operations regardless of the user privilege level.
User Privilege Level for Serial/Modem Channel
This combo box allows the user to select the privilege level for serial/modem channel access. The
privilege level set for the serial/modem channel takes precedence over the user privilege level. For
example, if the serial/modem channel is configured for user access only, then users are limited to
user operations regardless of the user privilege level.
102 Intel® SR870BN4 Server System Product Guide