Intel SR870BN4 - Server Platform - 0 MB RAM Product Manual page 95

Alert Settings
Up to four LAN alert destinations can be configured. When one or more IP addresses are
configured as alert destinations, this part of the screen shows those addresses, along with the
following associated configuration settings:
Gateway IP address for the destination IP address.
Whether alert acknowledge is enabled for the alerts sent to this destination.
The number of times the alert will be retried.
The interval in milliseconds between retries.
New, Edit, and Delete Buttons
If no alerts are configured, only the New button is enabled.
New: When the New button is clicked, the user is shown a screen on which a new LAN
destination address can be configured. See the following section for details.
Edit: If the user selects an IP address and then clicks the Edit button, screen where the user
can edit the configuration for the selected IP address is shown. See the following section for
details.
Delete: If the user selects an IP address and then clicks the Delete button, the selected IP
address is deleted. Before deleting the IP address, the user is prompted by a confirmation
prompt. If the user clicks OK to confirm deleting the address, the LAN Alerting Configuration
screen is redisplayed with the deleted address no longer shown.
These buttons affect only the copy of the firmware data internal to the SMU. Changes are written
to non-volatile storage in the firmware only after the user selects the Save button in the last LAN
configuration screen.
Intel® SR870BN4 Server System Product Guide 95