Displays Given Area; Displaying Fru Area - Intel SR870BN4 - Server Platform - 0 MB RAM Product Manual

Direct: FRUSDR /D FRU [NVS_TYPE | DEV_CNTR | NVS_LUN | DEV_BUS | DEV_ADDR]
NVS_TYPE - The type of EEPROM, { AT24C02, DS1624S, or IMBDEVICE (default) }
DEV_CNTR - Controller's Address; defaults to 'C20'. Must be prefixed by 'C'
NVS_LUN - The LUN; defaults to 'L00'. Must be prefixed by 'L'
DEV_ID - The Device ID; defaults to 00. Used only if NVS_TYPE is IMBDEVICE
DEV_BUS - The Device's bus; has no default value
DEV_ADDR - The Device's address; has no default value
The DEV_BUS and DEV_ADDR are required only if NVS_TYPE is not IMBDEVICE
If DEV_CNTR is specified, it must be 3 characters in length, including the 'C'
All numbers entered for DEV_CNTR, DEV_ID, DEV_BUS, and DEV_ADDR are interpreted as
hexadecimal values, in the range 0 - FF; LUN must be 0, 1, 2 or 3.
The command line arguments may be specified in any order, and if one of the arguments is not
specified then its default value is used; if it has one. If no arguments are specified for [Address]
then the BMC FRU is displayed.
Use a specified custom configuration file.
Usage: FRUSDR /CFG [Configuration file name].
If not specified, the name of the CFG file defaults to 'MASTER.CFG'. The configuration file may
be used to load multiple FRU and SDR files. In the configuration file, each FRU and SDR file
name must be called out.
Additionally, each FRU area and field to be programmed must also be specified. The configuration
file may be used to prompt or request information from the user, and to inquire from the user which
FRU areas to program.

Displays Given Area

When the utility is invoked with the /d FRU or /d SDR command line argument, the indicated area
is displayed. If the given display function fails because of an inability to parse the data present or
hardware failure the utility displays an error message.

Displaying FRU Area

The FRU area is displayed in ASCII format when the field is ASCII or as a number when the field
is a number. The FRU field strings are specified in the IPMI Platform Management FRU
Information Storage Definition. Each FRU area displayed is headed with the FRU area designated
name. Each FRU field has a field name header, followed by the field in ASCII or as a number.
The Internal Use area is displayed in hex format, 16 bytes per line. The Board, Chassis and Product
FRU areas are ended with an END OF FIELDS CODE, which indicate there is no more data in
this area.
Example:
FRU IMBDEVICE on Controller 20h, LUN 00h, Device ID 00h
Display Header Area
Common Header Area (Version 1, Length 8)
Internal Area Offset
Chassis Area Offset = 0Ah
78
= 01h
Intel® SR870BN4 Server System Product Guide