Working Inside The System; Tools And Supplies Needed - Intel SR870BN4 - Server Platform - 0 MB RAM Product Manual

5 Working Inside the System

This chapter presents procedures that describe removal and installation of most components inside
the system.

Tools and Supplies Needed

Procedures in this chapter require the following tools and supplies:
Jumper-removal tool or needle-nosed pliers
Small flat-bladed screwdriver
Torqx screwdrivers (T-8 and T-15)
Hex screwdriver for processor upgrades (2.5 mm)
Pen or pencil
Antistatic wrist strap and conductive foam pad (recommended)
As the user integrates new parts into the system, add information about them to your equipment log
(Appendix B on page 286). Record the model and serial number of the system, all installed
options, and any other pertinent information specific to the system.
178
Figure 57. Tools and Supplies Needed
Intel® SR870BN4 Server System Product Guide
OM12971