Removing The Intel Raid Activation Key - Intel SR6850HW4 - Server Platform - 0 MB RAM Product Manual

Servicing the RAID on Motherboard Components
Removing the Intel
1. Observe the safety precautions, warnings, and cautions described in
5.
2. Turn off all peripheral devices connected to the system.
3. Power down the system and unplug both AC power cords.
4. Remove the top cover. For instructions, see "Removing the Top Cover", page 144.
5. Remove the memory board air baffle or the memory board from Slot C. For instructions, see
"Cold Removal of Memory
6. If a PCI card is in Slot 7, remove it to expose the Intel
instructions on removing a PCI card, see
7. Insert the tip of a small flat-bladed screwdriver or equivalent under the plastic tab on the
snap-on plastic retainer holding the Intel
8. Gently push down on the screwdriver to lift the Intel
®
9. Store the Intel
10. Install the memory board air baffle or the memory board into Slot C. For instructions, see
"Cold Insertion of a Memory
11. If you needed to remove a PCI card from slot 7, install the card. For instructions, see
a Non-Hot-Plug PCI
12. Re-Install the top cover. For instructions, see
192
®
RAID Activation Key
Board", page 165.
®
RAID Activation Key in an anti-static bag.
Board", page 165.
Card", page 155.
Intel® Server Platforms SR6850HW4 and SR6850HW4/M Product Guide
®
RAID Activation Key holder. For
"Removing a Non-Hot-Plug PCI
RAID Activation Key on the main board.
®
RAID Activation Key from the holder.
"Installing the Top Cover", page 140.
"Safety Information", page
Card", page 154.
"Installing