Scenario 3: Using Proxy Arp To Enable An Ons 15454 Gateway; Figure 4-2 Scenario 2: Ctc And Ons 15454S Connected To Router - Cisco 15454-TCC - Network Processor Card Operation Manual

Operation guide
Hide thumbs Also See for 15454-TCC - Network Processor Card:
Table of Contents

Advertisement

ONS 15454 IP Addressing Scenarios
Figure 4-2
Subnet Mask 255.255.255.0
Default Router = 192.168.2.1

4.2.3 Scenario 3: Using Proxy ARP to Enable an ONS 15454 Gateway

Scenario 3 is similar to Scenario 1, but only one ONS 15454 (node #1) connects to the LAN
Two ONS 15454s (#2 and #3) connect to ONS 15454 #1 through the SONET DCC. Because all three
ONS 15454s are on the same subnet, Proxy ARP enables ONS 15454 #1 to serve as a gateway for ONS
15454s #2 and #3.
Cisco ONS 15454 Installation and Operations Guide
4-4
Scenario 2: CTC and ONS 15454s connected to router
CTC Workstation
IP Address 192.168.1.100
Subnet Mask 255.255.255.0
Default Gateway = 192.168.1.1
Host Routes = N/A
ONS 15454 #1
IP Address 192.168.2.10
Static Routes = N/A
LAN A
Int "A"
Int "B"
Router
IP Address of interface "A" to LAN "A" 192.168.1.1
IP Address of interface "B" to LAN "B" 192.168.2.1
Subnet Mask 255.255.255.0
Default Router = N/A
Host Routes = N/A
ONS 15454 #2
IP Address 192.168.2.20
Subnet Mask 255.255.255.0
Default Router = 192.168.2.1
Static Routes = N/A
SONET RING
Chapter 4
IP Networking
LAN B
ONS 15454 #3
IP Address 192.168.2.30
Subnet Mask 255.255.255.0
Default Router = 192.168.2.1
Static Routes = N/A
(Figure
4-3).
November 2001

Advertisement

Table of Contents
loading

Table of Contents