Syslog-Based Alerts
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
In Device Manager, choose Admin > Events > Call Home.
Click the Profiles tab in the Information Pane.
Step 2
You see the Call Home profiles shown in
Figure 62-8
Step 3
Set a message level for each switch using the drop-down menu in the MsgLevel column.
Click the Apply Changes icon to save your changes.
Step 4
Syslog-Based Alerts
You can configure the switch to send certain syslog messages as Call Home messages. The
syslog-group-port alert group selects syslog messages for the port facility. The Call Home application
maps the syslog severity level to the corresponding Call Home severity level (see the
Message Levels" section on page
level, syslog messages at levels 0, 1, and 2 are included in the Call Home log.
Whenever a syslog message is generated, the Call Home application sends a Call Home message
depending on the mapping between the destination profile and the alert group mapping and based on the
severity level of the generated syslog message. To receive a syslog-based Call Home alert, you must
associate a destination profile with the syslog alert groups (currently there is only one syslog alert
group—syslog-group-port) and configure the appropriate message level (see the
Level Feature" section on page
Note
Call Home does not change the syslog message level in the message text. The syslog message texts in
the Call Home log appear as they are described in the Cisco MDS 9000 Family System Messages Guide.
Configuring Syslog-Based Alerts Using Fabric Manager
To configure the syslog-group-port alert group using Fabric Manager, follow these steps:
Step 1
Select a switch in the Fabric pane.
Step 2
Expand Switches, expand Events, and select Call Home in the Physical Attributes pane.
You see the Call Home information in the Information pane.
Click the Profiles tab.
Step 3
You see the Call Home profiles shown in
Cisco MDS 9000 Family Fabric Manager Configuration Guide
62-12
Figure
Call Home Profiles
62-32). For example, if you select level 5 for the Call Home message
62-11).
Figure
Chapter 62
62-8.
62-9.
OL-17256-03, Cisco MDS NX-OS Release 4.x
Configuring Call Home
"Call Home
"Call Home Message
Need help?
Do you have a question about the AP775A - Nexus Converged Network Switch 5010 and is the answer not in the manual?
Questions and answers