Nortel 1110 Fundamentals page 546

546 Appendix I TFTP Server
Procedure 137
Downloading a font file
Step
1
2
3
Copyright © 2003–2007, Nortel Networks
.
Action
The version number is compared to the version number of the file
(for example, chinese.ccc) in the file system, if it exists. See
80 "Sample of the font configuration file" (page
If the file does not exist in the file system, or if the version is older
than the VERSION specified (for example, 1.1), then the IP Phone
downloads the font from the TFTP Server.
As the [FONTxx] sections are processed, the FONTLANG
configuration command is also processed. This command defines
the language codes for which a font is used. The MAP configuration
command defines how the font is mapped in the Unicode character
set. This command maps the font (for example, chinese.ccc) to the
UNICODE pages (for example, 0x3000-0xE000 and 0xF100) and
associates the font to the Traditional Chinese language code (for
example, zu-Hant). The [LANGUAGE] section specifies the prompt
files for the IP Phone. The prompt file is only downloaded to the file
system if the version is higher than the existing prompt version, or
if DOWNLOAD_MODE is set to FORCED. The IP Phone firmware
includes the base set of prompt files so downloads are not necessary
for languages natively supported by the firmware.
After the required fonts are downloaded from the TFTP Server, the
IP Phone resets and registers to the TPS.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
—End—
Figure
545).