Nortel 1110 Fundamentals page 542

Nortel communication server 1000
Hide thumbs Also See for 1110:
Table of Contents

Advertisement

542 Appendix I TFTP Server
4
5
6
7
8
9
Copyright © 2003–2007, Nortel Networks
.
you miss this step, and the phone begins to register to the TPS,
repeat step 1.
Follow the prompts to configure DHCP and other IP parameters or, if
DHCP and other parameters are already configured, just continue
pressing the 1 soft key or OK. The soft keys functions are listed
below:
soft key 1 (below the LCD) is OK
soft key 2 is BackSpace
soft key 3 is Clear
soft key 4 is Cancel
When prompted: TFTP Dwnld? (0-No, 1-Yes):0,
Press soft key 2 (BKSpace) to clear the 0 (No).
Press 1 on the dialpad, then press soft key 1 (OK).
When prompted: TFTP IP xxx.xxx.xxx.xxx,
If the IP address is correct for the TFTP server, press soft key
1 (OK). After the TFTP address is entered the first time, it is
presented the next time you enter the menu.
If the IP address is incorrect, press soft key 2 (Clear) to erase
the address shown and enter a new address. Press the asterisk
(*) key to enter a period (.) in the IP address. You can also use
backspace key to erase part of the address or correct errors by
pressing soft key 1 (BKSpace). When the address is correct,
press soft key 1 (OK).
The phone reads the configuration file from the TFTP server, extracts
the Server_IP and Filename fields, and attempts to download the
file. The display shows the message [FW] reading...
The display shows [FW] writing... and the blue LED starts to flash.
After the FW image is written to the phone, the message [FW]
finished is displayed, the blue LED stops flashing, and the phone
resets.
The phone registers to the TPS with the new FW version.
If the TFTP Server, specified by the TFTP IP address entered during
configuration, is unreachable or down, the IP Phone attempts to
register to the TPS to perform a firmware download. If the IP Phone
does not register to the TPS, the IP Phone does not work. Check
the TFTP IP address and the state of the TFTP Server, then reboot
the IP Phone.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007

Advertisement

Table of Contents
loading

Table of Contents