Nortel 1110 Fundamentals page 471

Function module
Network QoS process
Supplicant Status
Supplicant
Authentication Status
Supplicant Device ID
Supplicant
Authenticator ID
Ping and TraceRoute
The system administrator can use the local diagnostic tools, Ping or
Traceroute command, from a specific endpoint with any arbitrary destination,
typically another endpoint or Signaling Server. Ping and TraceRoute are
available in Local or Remote mode.
Ethernet statistics
In Local or Remote Mode, the system administrator can view ethernet
statistics (for example, number of collisions, VLAN ID, speed and duplex) for
the IP Phone on a particular endpoint. The exact statistics depends on what
is available from the IP Phone for the specific endpoint. The user may select
either the Network Port (NIport) or PC port (PCport).
IP Networking statistics
In Local or Remote Mode, the system administrator can view information
about the packets sent, packets received, broadcast packets received,
multicast packets received, incoming packets discarded, and outgoing
packets discarded.
DHCP information process
In Remote Mode, the system administrator can view DHCP settings (for
example, IP address, S1, S2, and S4 addresses) for each IP Phone. In
Local Mode partial information is available.
UNIStim/RUDP statistics
In Remote Mode, the system administrator can view RUDP statistics (for
example, number of messages sent, received, retries, resets, and uptime)
for the IP Phones.
RTP/RTCP statistics
In Remote Mode, the system administrator can view RTP/RTCP QoS
metrics (for example, packet loss and jitter) while a call is in progress.
Copyright © 2003–2007, Nortel Networks
.
After IP
Before IP Address
Address assignment,
assignment unregistered -
Local Mode
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
Text-based diagnostic utilities 471
Registered
Call in
(TPS) - progress
Remote Mode (TPS)
Yes, last call Yes, renew
Yes Yes
Yes Yes
Yes Yes
Yes Yes