Nortel 1110 Fundamentals page 510

510 Appendix F IP Phone diagnostic utilities
8
9
10
11
3. Ethernet Statistics
Use
Ethernet Statistics menu.
Copyright © 2003–2007, Nortel Networks
.
The IP Phone attempts to contact (ping) the address the number of
configured times, and displays the results of each attempt.
To stop the ping before completing, tap the Stop soft key.
The Stop soft key becomes the Return soft key. The results of ping
are displayed as follows
• Packets transmitted (Tx)
• Packets received (Rx)
• Percentage of Packets Lost (Lost)
• Minimum round trip time (Min)
• Maximum round trip time (Max)
• Average round trip time (Avg)
Press the Tracert soft key to request the IP Phone to trace the route
to the entered IP address, up to MaxHop nodes.
The IP Phone displays the following
Tracing route to:
hops
(where x.x.x.x is the entered IP address and y is the number of hops
displayed at the top of the screen)
The Return soft key changes to Stop and the other soft keys
become blank.
The IP Phone traces the route to the address for the configured
number of server hops, displaying the hop number (starting at 0),
the time in milliseconds, and the IP address.
When the trace is complete, the screen displays the following
Trace complete.
To stop Tracert before it completes, tap the Stop soft key.
The Stop soft key becomes the Return soft key when Tracert stops.
Tap the Return soft key to return to Local Tools menu or the Stop
key to exit the menu and return to the IP Phone display.
Procedure 125 "Using Ethernet Statistics tool" (page 511)
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
(x.x.x.x) over a maximum of y
—End—
to use the