Replacing an IP Phone 2002
Two IP Phones cannot share the same TN. You must remove the IP Phone 2002
that currently uses the TN.
Procedure 15
Replacing an IP Phone 2002
Step
1
2
3
4
Removing an IP Phone 2002 from service
Procedure 16
Removing an IP Phone 2002 from service
Step
1
2
Copyright © 2003–2007, Nortel Networks
.
Action
Obtain the node and TN information of the phone you want to
replace.
Disconnect the IP Phone 2002 that you want to replace.
Follow
Procedure 9 "Configuring the IP Phone 2002" (page 75)
Procedure 10 "Installing the IP Phone 2002 for the first time using
manual configuration" (page 79)
Phone 2002 for the first time using DHCP" (page 86)
configure the IP Phone 2002.
Enter the same TN and Node Number as the IP Phone 2002 you
replaced. The Call Server associates the new IP Phone 2002 with
the existing TN.
Action
Disconnect the IP Phone 2002 from the network or turn off the power.
The service to the PC is disconnected as well if the PC connects to
the IP Phone 2002.
If the IP Phone 2002 was automatically configured, the DHCP lease
expires and the IP address returns to the available pool.
In LD 11, enter OUT at the TN prompt.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
Removing an IP Phone 2002 from service 97
—End—
ATTENTION
or
Procedure 11 "Installing an IP
—End—
and
to install and