Configuring Secure Local Menu Through Full Dhcp; Accessing The Local Tools Menu - Nortel 1110 Fundamentals

Configuring Secure Local Menu through Full DHCP
Password protection is enabled during Full DHCP configuration if the
SECUREMENU parameter, or the PARTSECURE parameter are present at
the end of the S4 part of the Full DHCP string. If neither the SECUREMENU
parameter, nor the PARTSECURE parameter is present, password
protection is not enabled.
The SECUREMENU/PARTSECURE item is an optional parameter. If it is
present, then the full S4 string needs to be present, including the action
and retries. The S4 string is already present if the XAS support has been
configured through the DHCP. If XAS is not configured, you can still enable
password protection by setting the S4 IP address to 0.0.0.0 and by setting
the other fields to 0.
With Full DHCP, the vendor-specific or site-specific options must be configured
depending on the customers DHCP server configuration.
For further information about configuring Full DHCP, see Converging the
Data Network with VoIP Fundamentals (NN43001-260).

Accessing the Local Tools menu

After you enter the password, the Local Tools menu remains active for 5
minutes. You can freely navigate, exit and reenter the Local Tools menu
without being prompted to reenter the password. To reset the timer before
the 5-minute time expires, double-press the Services key.
You can also press the 5 key to select the Lock Now item from the Lock
Menu. The Lock Now item immediately exits the Local Tools menu, closes
any open Local Tools menu pages, and locks the Local Tools menu.
Alternatively, when time expires, the Local Tools menu and any open
submenus are closed. Double-press the Services key to open the password
prompt window to reaccess the Local Tools menu.
Copyright © 2003–2007, Nortel Networks
.
— 3. Manual Disable Secure Menu
— 4. DHCP Secure Menu
— 5. Lock Now
The settings configured in the Lock Menu sub menu override the settings
received from the DHCP string.
For more information about 4. Lock Menu manual user settings, see
Appendix "Configuring the Local Tools menu" (page
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
Local Tools menu password protection 351
ATTENTION
459).