Installation And Configuration; Before You Begin - Nortel 1110 Fundamentals

3 m (9.9 ft), 125 VAC, Option 11C Denmark power cord
Denmark
Argentina
1.8 m (5.9 ft), 10 amp, IEC320-C13
Japan
Installation and configuration
The following sections provide a step-by-step guide to install and configure
the IP Phone 1120E
•
•
•
•
•

Before you begin

Before installing the IP Phone 1120E, complete the following pre-installation
checklist
•
•
•
•
Copyright © 2003–2007, Nortel Networks
.
Before you begin
First-time installation
Configuring the IP Phone 1120E
Startup sequence
Installing the IP Phone 1120E
Ensure one IP Phone 1120E boxed package exists for each IP Phone
1120E being installed. The package contains
— IP Phone 1120E
— handset
— handset cord
— 2.1 m (7-ft) CAT5 Ethernet cable
— Number plate and lens
— Getting Started Card
Ensure 1 Software License exists for each IP Phone 1120E being
installed.
Ensure the host Call Server is equipped with the a voice Gateway Media
Card and a Signaling Server with the Line TPS application.
If an AC power adapter is required, ensure the approved Nortel global
power supply (model number N0089601) is used. See
Phone 1120E components list" (page
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
Installation and configuration 317
NTTK22ABE6 NTTK22AB
N/A A0814961
NTTK26AAE6 N/A
Table 43 "IP
316).