Installation And Configuration; Before You Begin - Nortel 1110 Fundamentals

2.4 m (8 ft), 240 VAC 10 amp, ANZ power cord AS-3,
Australia, New Zealand
250 VAC, Option 11C Standard European power cord,
Other EMEA, Kenya, Korea, Thailand, Indonesia,
Vietnam, India, Pakistan
3 m (9.9 ft) 125 VAC, Option 11C Swiss power cord
Switzerland
240 VAC, Option 11C UK power cord Hong Kong, Ireland,
United Kingdom, Singapore, Malaysia, Bangladesh,
Brunei, Sri Lanka
3 m (9.9 ft), 125 VAC, Option 11C Denmark power cord
Denmark
Argentina
1.8 m (5.9 ft), 10 amp, IEC320-C13
Japan
Installation and configuration
The following sections provide a step-by-step guide to install and configure
the IP Phone 1110
•
•
•
•
•

Before you begin

Before installing the IP Phone 1110, complete the following pre-installation
checklist
•
•
Copyright © 2003–2007, Nortel Networks
.
Before you begin
First-time installation
Configuring the IP Phone 1110
Startup sequence
Installing the IP Phone 1110
Ensure one IP Phone 1110 boxed package exists for each IP Phone
1110 being installed. The package contains
— IP Phone 1110
— handset
— handset cord
— 2.1 m (7-ft) CAT5 Ethernet cable
— number plate and lens
— Getting Started Card
Ensure 1 Software License exists for each IP Phone 1110 being
installed.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
Installation and configuration 275
N/A NTTK15AA
NTTK16ABE6 NTTK16AB
NTTK17ABE6 NTTK17AB
NTTK18ABE6 NTTK18AB
NTTK22ABE6 NTTK22AB
N/A A0814961
NTTK26AAE6 N/A