Components And Functions; Keys And Functions - Nortel 1110 Fundamentals

Components and functions

This section describes the following components and functions of the IP
Phone 2007:
•
•
•

Keys and functions

Table 20 "IP Phone 2007 keys and functions" (page 171)
functions for the IP Phone 2007.
Table 20
IP Phone 2007 keys and functions
Key
Hold
Goodbye
Handsfree
Headset
Mute
Volume control bar
Message waiting
light/incoming call
indicator
Copyright © 2003–2007, Nortel Networks
.
Keys and functions
Services menu
Local Tools menu
Function
Press the Hold key to put an active call on hold. Tap the flashing line
(DN) soft key to return to the caller on hold.
Press the Goodbye key to terminate an active call.
Press the Handsfree key to activate handsfree.
The LED lights to indicate when the handsfree feature is active.
Press the Headset key to answer a call using the headset or to switch a
call from the handset or handsfree to the headset.
Press the Mute key to listen to the receiving party without transmitting.
Press the Mute key again to return to a two-way conversation. The Mute
key applies to handsfree, handset, and headset microphones.
The Mute LED flashes when the Mute option is in use.
Use the Volume control bar to adjust the volume of the ringer, handset,
headset, speaker, and the Handsfree feature.
Press the right side of the rocker bar to increase volume, the left side
to decrease volume.
The Message waiting indicator turns ON to indicate that a message has
been left for the user. This indicator also flashes when the set ringer is
ON.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
Components and functions 171
lists the keys and