Nortel 1110 Fundamentals page 540

540 Appendix I TFTP Server
Field Name
DOWNLOAD_MODE
VERSION
FILENAME
PROTOCOL
SERVER_IP
SECURITY_MODE
Use
firmware for the IP Phone 1110, IP Phone 1120E, IP 1140E, and IP Phone
1150E using automatic TFTP download during bootup.
Procedure 135
Updating the firmware
Step
1
2
Copyright © 2003–2007, Nortel Networks
.
Field Value
AUTO
FORCED
0625Cxx
0625Cxx.bin
TFTP
xxx.xxx.xxx.xxx
0
Procedure 135 "Updating the firmware" (page 540)
Action
Use one of the three methods to configure the TFTP Server address:
•
Access the Network Configuration menu. Enter the address
at the TFTP IP prompt. Press the ApplyandReset soft key to
save the change.
• Enter the address in the BootC menu. See
Download from BootC Procedure" (page
BootC idz_8958 is not available for Expansion Modules for IP
Phones 1100 Series.
• Enter the IP address in the TFTP IP address field retrieved by
the DHCP Server.
Restart the phone.
After the IP Phone starts and begins to run the latest version of
firmware, the 1110.cfg, 1120e.cfg, 1140e.cfg, and 1150e.cfg files
are downloaded from the TFTP Server. After the .cfg file is retrieved,
the DOWNLOAD_MODE and VERSION fields are checked. If
necessary, the firmware file is transferred to the phone using TFTP.
The display shows the message [FW] reading... If successful, the
display shows [FW] writing... and the blue LED starts to flash. After
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
Descriptions
Recommended setting. The application looks
at the version and downloads the FW if it is a
newer version than what is on the phone.
The version of firmware is ignored. The
firmware is always downloaded.
The version string compared to what is on the
phone.
Image file name. Must match the file name of
the actual IP Phone FW file.
Download protocol. Must be TFTP.
IP Address of the TFTP server in decimal.
For future use.
to upgrade the
"Manual TFTP
541).