Nortel 1110 Fundamentals page 539

Updating the firmware for IP Phone 1110,
IP Phone 1120E, IP Phone 1140E, and IP Phone 1150E
Automatic TFTP download at bootup
If a TFTP IP address has been configured and a firmware upgrade is
available on the server when the phone restarts, the phone executes the
automatic TFTP download. This method requires the TFTP Server to store
the .cfg and 0625Cxx.bin files for the IP Phone in the root directory.
For example, the IP Phone 1110, IP Phone 1120E, IP Phone 1140E, and IP
Phone 1150E require the following files:
•
•
•
•
Table 75 "Fields in the TFTP configuration file" (page 539)
the fields in the configuration file on the TFTP Server. The download
mode can be set to AUTO or FORCED. It is recommended that you set
DOWNLOAD_MODE to AUTO.
Table 75
Fields in the TFTP configuration file
Field Name
[FW]
Copyright © 2003–2007, Nortel Networks
.
The phone goes blank briefly. Then the message Starting TFTP
download appears on the screen. Then the firmware is downloaded.
The message Writing firmware to Flash ROM appears on the screen
while the firmware is written to Flash memory. The IP Phone 2007
resets and the application starts.
1110.cfg
0625Cxx.bin
1120e.cfg
0625Cxx.bin
1140e.cfg
0625Cxx.bin
1150e.cfg
0625Cxx.bin
0625Cxx.bin is the name of the firmware file by default, but the
location and the name of the firmware image file being downloaded
is specified in .cfg and can be any name. The name of the firmware
image file can be specified in relative path name notation (for example,
/subfolder/name.ext or name.ext).
Field Value
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
Updating IP Phones firmware 539
—End—
Descriptions
Section header for firmware download info
describes