Nortel 1110 Fundamentals page 206

206 IP Phone Key Expansion Module (KEM)
Prompt Response
Copyright © 2003–2007, Nortel Networks
.
Description
Telephone function key assignments
The following key assignments determine calling options
and features available to an IP Phone. Note that KEY is
prompted until a carriage return <CR> is entered.
Where:
xx = key number
aaa = key name or function
yyy = additional information required for the key
zz.z = additional information required for the key aaa.
The cccc or D entry deals specifically with the Calling Line
Identification feature, where:
cccc = CLID table entry of (0)-N, where N = the value
entered at the SIZE prompt in LD 15 minus 1.
D = the character "D". When the character "D" is entered,
the system searches the DN keys from key 0 and up,
to find a DN key with a CLID table entry. The CLID
associated with the found DN key is then used.
The position of the (cccc or D) field varies depending on
the key name or function.
You may enter a CLID table entry if aaa = ACD, HOT d,
HOT L, MCN, MCR, PVN, PVR, SCN, or SCR.
Type xx NUL to remove a key function or feature.
Some data ports require specific key assignments.
See the Meridian Data Services NTPs for information
regarding these requirements.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007