Pairing Your Headset - Nortel 1110 Fundamentals

Create the DEVICE CONFIG section and file
The file pointed to by the [DEVICE CONFIG] section contains the parameter,
ENABLE_BT. The parameter value is set to 1, which enables Bluetooth
wireless technology.
The [DEVICE_CONFIG] section can point to a single file that enables or
disables the Bluetooth wireless technology on all phones, or it can point
to a device configuration file for specific phones using a wildcard file
name to enable the Bluetooth wireless technology for select phones. The
configuration files for the specific phones use the IP Phone MAC address as
the file name with the .cfg file extension.
Table 73 "[DEVICE_CONFIG] field name definitions" (page 523)
[DEVICE_CONFIG] section field names and definitions.
Table 73
[DEVICE_CONFIG] field name definitions
Field name
[DEVICE_CONFIG]
DOWNLOAD_MODE
VERSION
FILENAME
SERVER_IP

Pairing your headset

Use
with your IP Phone" (page 524)
headset with your IP Phone.
Copyright © 2003–2007, Nortel Networks
.
be accessed but the ENABLE_BT line is either missing, or is present but
the value of 1 is missing.
Field value
FORCED
or
000001
1140eDEV.cfg
or
*.cfg
xxx.xxx.xxx.xxx
Procedure 130 "Pairing the Bluetooth wireless technology headset
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
Definition
Section header for device configuration file
information
Recommended setting. The version is ignored
and the DEVICE_CONFIG file is always read.
The version of the device config file
Device config filename. The file name can be
anything. If a file name is specified, the file
name is loaded to every IP Phone 1140e.
A wildcard file name enables a different setting
to be configured for every IP Phone. The IP
Phone checks for a file with the MAC address as
the file name (for example, 001365FEF1C6.cfg).
The IP address of the TFTP Server that
downloads the FILENAME file.
to pair the Bluetooth wireless technology
Description 523
lists the