Startup Sequence; Installing The Ip Phone 1140E - Nortel 1110 Fundamentals

360 Nortel IP Phone 1140E

Startup sequence

When an IP Phone 1140E connects to the network, it must perform a startup
sequence. The elements of the startup sequence include
•
•
•
•
See
of the IP parameters and how they are obtained.
Table 49
IP Phone 1140E IP parameters
Parameter
VLAN ID
IP Address
Net Mask
Default Gateway address
Connect Server (IP address, port,
action and retry count—primary and
secondary)
User ID (Node ID, Node Password
and TN)

Installing the IP Phone 1140E

To install the IP Phone 1140E, use
1140E" (page
Copyright © 2003–2007, Nortel Networks
.
obtaining VLAN ID (if supported by the network infrastructure)
obtaining the IP parameters
connecting to the Call Server
obtaining a User ID
Table 49 "IP Phone 1140E IP parameters" (page 360)
Method of acquisition
Manually entered or automatically obtained through
DHCP, and LLDP.
Manually entered or automatically obtained through Partial
or Full DHCP.
Manually entered or automatically obtained through Partial
or Full DHCP.
Manually entered or automatically obtained through Partial
or Full DHCP.
Manually entered or automatically obtained through Full
DHCP.
Manually entered for first-time configuration. Obtained
from local storage on subsequent power cycles.
361).
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
Procedure 74 "Installing the IP Phone
for a summary