Accessing The Local Tools Menu; Key Number Assignments; Self-Labeled Line/Programmable Feature Keys - Nortel 1110 Fundamentals

For further information about configuring Full DHCP, see Converging the
Data Network with VoIP Fundamentals (NN43001-260).

Accessing the Local Tools menu

After you enter the password, the Local Tools menu remains active for 5
minutes. You can freely navigate, exit and reenter the Local Tools menu
without being prompted to reenter the password. To reset the timer before
the 5-minute time expires, double-press the Services key.
You can also press the 5 key to select the Lock Now item from the Lock
Menu. The Lock Now item immediately exits the Local Tools menu, closes
any open Local Tools menu pages, and locks the Local Tools menu.
Alternatively, when time expires, the Local Tools menu and any open
submenus are closed. Double-press the Services key to open the password
prompt window to reaccess the Local Tools menu.
If you enter an incorrect password, the Local Tools menu does not open.
Double-press the Services key to open the password prompt window. Only
three incorrect password entries are allowed. Any entry after the three
attempts is ignored for 5 minutes. The password prompt window is visible
and you can reenter the password but the password is not processed until
the 5-minute time expires.
Some text appears dimmed depending on the current state of the menu lock
and the configuration of the IP Phone. Only configuration options that are
enabled from the current state appear active. Menu options that are not
available appear dimmed.
For more information about configuring the Local Tools menu for the IP
Phone 1150E, see

Key number assignments

This section describes the following keys supported on the IP Phone 1150E
•
•
•

Self-labeled line/programmable feature keys

The IP Phone 1150E has six self-labeled line/programmable feature keys,
which can support up to 12 DNs or features on two pages. When a call is
presented on a feature key which is not currently shown, the message Shift
for Call appears in the display area. Press the Shift/Outbox key to access
the second page of a feature or DNs, or to access any Expansion Module
1100s attached to the phone.
Copyright © 2003–2007, Nortel Networks
.
Appendix "Configuring the Local Tools menu" (page
self-labeled line/programmable feature keys
ACD fixed feature keys
soft keys
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
Key number assignments 391
459).