Replacing An Ip Audio Conference Phone 2033 - Nortel 1110 Fundamentals

3
4
5
6

Replacing an IP Audio Conference Phone 2033

Two IP Phones cannot share the same TN. You must remove the IP Audio
Conference Phone 2033 that currently uses the TN.
Procedure 31
Replacing an IP Audio Conference Phone 2033
Step
1
2
3
Copyright © 2003–2007, Nortel Networks
.
Replacing an IP Audio Conference Phone 2033 167
b. Set the password as non-NULL.
Press OK when the node number displays.
If
the node password is enabled and
is not NULL
the node password is disabled
Enter the password at the password screen, and press OK.
A TN screen displays.
To obtain the password, enter the nodePwdShow command in
Element Manager. For further information, see Element Manager
System Reference—Administration (NN43001-632).
Select the Shift soft key labeled (>>) and press Clear to edit the
TN field. The IP Audio Conference Phone 2033 by default places
you in the units field of the TN. You cannot use backspace to move
to the loop, shelf or card fields.
Enter the new TN.
Action
Obtain the node and TN information of the phone you want to
replace.
Disconnect the IP Audio Conference Phone 2033 that you want to
replace.
Follow Procedure 25 "Configuring the IP Audio Conference Phone
2033" (page 148) and
Conference Phone 2033 for the first time using manual configuration"
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
Then
a password screen displays. Go
to Step
a TN screen displays. Go to
5.
—End—
ATTENTION
Procedure 26 "Installing the IP Audio
4.
Step