Nortel 1110 Fundamentals page 197

48
49
50
51
52
Copyright © 2003–2007, Nortel Networks
.
the IP Phone downloads the file and upgrades the firmware. This
takes several minutes. When the upgrade is complete, the IP Phone
2007 reboots.
For further information about TFTP Server configuration, see
Appendix "TFTP Server" (page
The Enhanced UNIStim firmware download is supported on CS 1000
Release 4.5 or later. The Enhanced UNIStim firmware download
feature for IP Phones improves the delivery of new firmware to IP
Phones. For further information about Enhanced UNIStim Firmware
Download, see IP Line Fundamentals (NN43100-500).
For information about the IP Phone firmware upgrade using Element
Manager, see Element Manager System Reference—Administration
(NN43001-632).
The IP Phone 2007 can support a primary (S1) and secondary (S2)
connect server. If you require IP Phones to register on multiple
nodes, see IP Line Fundamentals (NN43100-500).
The IP Phone 2007 searches for the connect server.
The IP Phone 2007 registers with the Terminal Proxy Server (TPS)
and, if needed, begins the firmware download. This takes several
minutes. When download is complete, the IP Phone 2007 resets.
The current system date and time appear on the top line of the
display when the configuration is complete. Self-labeling keys also
appear.
Check for dial tone and the correct DN above the display.
(Optional) Customize the feature keys as required. For more
information, see the IP Phone 2007 User Guide (NN43118-100).
Tap the Tools icon to calibrate the touch panel and stylus.
Tap the Touch Panel Setup soft key.
The screen displays a calibration map, the Cancel soft key is
displayed, and the following system prompt is displayed:
Touch the center of the red ball.
Use the stylus and tap each of the red dots, in order, starting with
the lower left portion of the screen, and following the sequence as
prompted.
After the third dot is tapped, the display changes to indicate the
result of calibration.
• If the calibration is successful, the IP Phone displays the
following report:
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
Installation and configuration 197
533).