Installation - Nortel 1110 Fundamentals

420 Expansion Module for IP Phone 1100 Series
Prompt
CLS
KEY
PAGEOFST
KEY <key>
KEMOFST
KEY <key>

Installation

The Expansion Module mounts on the right side of the IP Phone. The
Expansion Module snaps into the receptacle on the back of the IP Phone
using the desk-mount bracket and structural baseplate supplied with the
Expansion Module.
The Expansion Module connects to the IP Phone using the Accessory
Expansion Module (AEM) port on the IP Phone.
Use
(page 421)
to the IP Phone.
Copyright © 2003–2007, Nortel Networks
.
Response Description
KEM3 KEM3 CLS must be defined
0 - <see Key number range expanded to support number of
text>/<CR> Expansion Modules specified by KEM prompt. The range
on the IP Phone is as follows:
KEM value:
0
1
2
3
<Page> <KeyOff PAGEOFST is prompted if one Expansion Modules is
-set> / <CR> specified at the KEM prompt and <CR> is entered at the
KEY prompt. This prompt enables you to enter a Page
number of 0, or 1, and a Key Offset number from 0 to 17.
Once entered, the KEY is prompted with the appropriate
KEY value filled in. <CR> ends the input.
<keys conf <key> is the key number for the Page + Key Offset
data>/ <CR> entered at PAGEOFST. Enter the key configuration <CR>
or just <CR>.
<KEM> <Key-Of KEMOFST is prompted if two or three Expansion Modules
f-set> / <CR> are specified at the KEM prompt and <CR> is entered
for KEY prompt.
This prompt enables you to enter a KEM number of 1,
2, or 3 and a KEY Offset number from 0 to 17. Once
entered, the KEY prompt is prompted with the appropriate
KEY value filled in. <CR> ends the input.
<keys conf <key> is the key number for the KEM + Key Offset entered
data>/ <CR> at KEYOFST. Enter the key configuration <CR> or just
<CR>.
Procedure 87 "Connecting the Expansion Module to the IP Phone"
to connect the Expansion Module for IP Phone 1100 Series
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
KEY range:
0 to 31
32 to 49
50 to 67
68 to 85