Nortel 1110 Fundamentals page 82

82 Nortel IP Phone 2002
Copyright © 2003–2007, Nortel Networks
.
Screen prompt
Speed (0-A, 1-10, 2-100)
Duplex (0-A, 1-F, 2-H)
802.1Q (0-No, 1-Yes)
Voice VLAN? (0-N, 1-Y)
VLAN Cfg? 0-Auto,
1-Man:
LLDP-MED? (0-No, 1-Yes)
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
Description
Network interface port speed.
Default 0 (for Auto)
0 = Auto
1 = 10 BT
2 = 100 BT
You are not prompted for Speed if PC
Port is set to 0 for Off.
Default 1 (for Auto).
0 = Auto
1 = Full
2 = Half
You are not prompted for Duplex if PC
Port is set to 0 for Off or if Speed is set
to 0 for Auto.
Default 1 (for Yes).
You are not prompted for 802.1Q if LLDP
is not enabled.
Default 0 (for No).
You are not prompted for Voice VLAN if
802.1Q is not enabled.
Default 0 (for Auto).
You are not prompted for VLAN Cfg is
Voice VLAN is not enabled.
0-Auto
Automatically obtains VLAN ID using
DHCP or the 802.1ab data switch.
1-Man
Enter the VLAN ID manually. This is a
number from 1 to 4094.
If you select 1 (1 for Yes), VLAN ID is
configured automatically to the value
received in the Network Policy TLV.
You are not prompted for LLDP-MED if
VLAN is not set to Auto (2-Auto,) or if
LLDP is not enabled.