Nortel 1110 Fundamentals page 208

208 IP Phone Key Expansion Module (KEM)
Prompt Response
PAGEOFS <Page>
T <KeyOffset>
KEY xx
KEMOFST <KEM>
<KeyOffset>
Copyright © 2003–2007, Nortel Networks
.
Description
On M3905, the craftsperson can assign NUL or a server
application on key 5. On key 6, the craftsperson can
assign NUL or a local application.
On M3905, the craftsperson can assign NUL or the
program key on key 7.
On M3905, the craftsperson can assign AAG, AMG, ASP,
DWC, EMR, MSB, or NRD on keys 8-11. Other features
are blocked.
Automatically calculates the IP Phone KEM key based
on the entered values. This prompt enables the system
administrator to enter a Page number of 0 or 1 and a
Key Offset number from 0 to 23. Once entered, the KEY
prompt is prompted with the appropriate KEY value filled
in.
Enter <CR> to terminate data entry.
Applies to an IP Phone 2004 with
KEM = 1, and where <CR> was entered at the KEY
prompt.
Does not apply to an IP Phone 2002.
When values are entered for Page and KeyOffset, the
KEY xx prompt displays, followed by PAGEOFST prompt.
This loop continues until no values (<CR> only) are
entered at the PAGEOFST prompt.
Edit the IP Phone KEM key number specified by
PAGEOFST, where:
xx = the number of the key (for example, KEY 36)
Enter <CR> to keep the current setting.
Automatically calculates the IP Phone KEM key based
on the entered values. This prompt enables the system
administrator to enter a KEM number of 1 or 2 and a Key
Offset number from 0-23. Once entered, the KEY prompt
is prompted with the appropriate KEY value filled in.
Enter <CR> to terminate data entry.
When values are entered for KEM and KeyOffset, the KEY
xx prompt displays, followed by KEMOFST prompt. This
loop continues until no values (<CR> only) are entered
at the KEMOFST prompt.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007