Installation And Configuration; Before You Begin - Nortel 1110 Fundamentals

354 Nortel IP Phone 1140E
3 m (9.9 ft), 125 VAC, Option 11C Denmark power cord
Denmark
Argentina
1.8 m (5.9 ft), 10 amp, IEC320-C13
Japan
Installation and configuration
The following sections provide a step-by-step guide to install and configure
the IP Phone 1140E
•
•
•
•
•

Before you begin

Before installing the IP Phone 1140E, complete the following pre-installation
checklist
•
•
•
•
Copyright © 2003–2007, Nortel Networks
.
Before you begin
First-time installation
Configuring the IP Phone 1140E
Startup sequence
Installing the IP Phone 1140E
Ensure one IP Phone 1140E boxed package exists for each IP Phone
1140E being installed. The package contains
— IP Phone 1140E
— handset
— handset cord
— 2.1 m (7-ft) CAT5 Ethernet cable
— Number plate and lens
— Getting Started Card
Ensure 1 Software License exists for each IP Phone 1140E being
installed.
Ensure the host Call Server is equipped with a Voice Gateway Media
Card and a Signaling Server with the Line TPS application.
If an AC power adapter is required, ensure the approved Nortel global
power supply (model number N0089601) is used. See
Phone 1140E component list" (page
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
NTTK22ABE6
N/A
NTTK26AAE6
Table 48 "IP
353).
NTTK22AB
A0814961
N/A