Nortel 1110 Fundamentals page 83

Copyright © 2003–2007, Nortel Networks
.
Screen prompt
LLDP VLAN? (0-No,
1-Yes)
DHCP (0-No, 1-Yes)
VLANFILTER (0-N, 1-Y)
Ctrl pBits (0-7, 8-Au)
Media pBits (0-7, 8-Au)
PC Port? (0-Off, 1-On)
Speed (0-A, 1-10, 2-100)
Duplex (0-A, 1-F, 2-H)
Data 802.1Q (0-N, 1-Y)
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
Installation and configuration 83
Description
If you select 1 (1 for Yes), VLAN ID is
configured automatically to the value
received in the VLAN NAME TLV.
You are not prompted for LLDP VLAN if
VLAN is not set to Auto (2- Auto), or if
LLDP is not enabled.
If you select 1-Y (1 for Yes), the VLAN
ID is configured automatically to a value
received from the DHCP server.
You are not prompted for DHCP if VLAN
is not set to Auto (2-Au), or if DHCP is not
enabled.
Default 0 (for No)
You are not prompted for VLANFILTER if
VLAN is not enabled.
Default 8 (for Auto).
You are not prompted for Ctrl pBits if
802.1Q is not enabled.
Default 8 (for Auto).
You are not prompted for Media pBits if
802.1Q is not enabled.
Default 1 (for On).
Default 0 (for Auto).
0 = Auto
1 = 10 BT
2 = 100 BT
You are not prompted for Speed if PC
Port is set to 0 for Off.
Default 1 (for Auto).
0 = Auto
1 = Full
2 = Half
You are not prompted for Duplex if PC
Port is set to 0 for Off and if Speed is set
to 0 for Auto.
You are not prompted for Data 802.1Q if
PC Port is set to 0 for Off.