Nortel 1110 Fundamentals page 127

Copyright © 2003–2007, Nortel Networks
.
Screen prompt
DHCP (0-No, 1-Yes)
VLANFILTER (0-No, 1-Yes)
Duplex? (0-Auto, 1-Full)
Ctrl pBits (0-7, 8-Au)
Media pBits (0-7, 8-Au)
PC Port? (0-Off, 1-On)
Speed (0-A, 1-10, 2-100)
Duplex (0-A, 1-F, 2-H)
Data 802.1Q (0-N, 1-Y)
Data VLAN? (0-N, 1-Y)
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
Installation and configuration 127
Description
Default 0 (for No).
If you select 1 (1 for Yes),
the VLAN ID is configured
automatically to a value received
from the DHCP server.
You are not prompted for DHCP if
VLAN is not set to Auto (2-Au), or
if DHCP is not enabled.
Default 0 (0 for No).
You are not prompted for
VLANFILTER if VLAN is not
enabled.
Default 0 (for Auto).
Default 8 (for Auto).
You are not prompted for Ctrl
pBits if 802.1Q is not enabled.
Default 8 (for Auto).
You are not prompted for Media
pBits if 802.1Q is not enabled.
Default 1 (for On).
Default 0 (for Auto)
0 = Auto
1 = 10 BT
2 = 100 BT
You are not prompted for Speed if
PC Port is set to 0 for Off.
Default 1 (for Auto).
0 = Auto
1 = Full
2 = Half
You are not prompted for Duplex
if PC Port is set to 0 for Off and if
Speed is set to 0 for Auto.
You are not prompted for Data
802.1Q if PC Port is set to 0 for
Off.
Default 0 (for No).
You are not prompted for Data
VLAN if PC port is set to 0 for Off.