Extensible Authentication Protocol; Redeploying An Ip Phone 2002; Changing The Tn Of An Existing Ip Phone 2002 - Nortel 1110 Fundamentals

96 Nortel IP Phone 2002

Extensible Authentication Protocol

Extensible Authentication Protocol (EAP) is a general protocol that fulfills
the protocol requirements defined by 802.1x. For further information about
802.1x, see
455).

Redeploying an IP Phone 2002

You can redeploy an existing previously configured IP Phone 2002 on the
same Call Server. For example, the IP Phone 2002 can be assigned to
a new user (new TN) or to an existing user who moved to a new subnet
by changing the TN of the IP Phone 2002. For further information, see
Converging the Data Network with VoIP Fundamentals (NN43001-260).
Procedure 14

Changing the TN of an existing IP Phone 2002

Step
1
2
3
4
5
6
Copyright © 2003–2007, Nortel Networks
.
Appendix "802.1x Port-based network access control" (page
Action
Repower the IP Phone 2002.
During the reboot sequence of a previously configured IP Phone, the
IP Phone 2002 displays the existing node number for approximately
5 seconds.
If the node password is enabled and NULL, choose one of the
following:
a. Disable the password.
b. Set the password as non-NULL.
Press OK when the node number displays.
If
the node password is enabled and
is not NULL
the node password is disabled
Enter the password at the password screen and press OK.
A TN screen displays.
To obtain the password, enter the nodePwdShow command in
Element Manager. For further information, see Element Manager
System Reference—Administration (NN43001-632).
Select the Clear soft key to clear the existing TN.
Enter the new TN.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
Then
a password screen displays. Go
to Step 4.
a TN screen displays. Go to
5.
Step