Nortel 1110 Fundamentals page 367

35
36
37
38
39
40
41
Copyright © 2003–2007, Nortel Networks
.
•
Force Half—Duplex mode is forced to Half Duplex on the PC
PC Port Duplex appears dimmed if the PC Port Speed option
is set to Auto.
Use the Right navigation key to scroll and highlight Disable Data
802.1Q check box. Press the Enter key to switch this item on and off.
Use the Right navigation key to scroll and highlight DataVLAN box.
Press the Down navigation key to open the list box.
The DataVLAN option appears dimmed if Disable Data 802.1Q
check box is selected.
Use the Up/Down navigation keys to scroll and highlight one of the
following options
• No VLAN
• LLDP VLAN Name—VLAN ID is configured automatically to the
value received from 802.1ab LLDP
•
VLAN ID value—manual selection of VLAN ID from 1 to 4094
If LLDP is disabled, LLDP VLAN Name does not appear in the list.
Press the Enter key.
Use the Right navigation key to scroll and highlight Data Priority
Bits box. Press the Down navigation key to open the list box. Select
Auto (default), 1, 2, 3, 4, 5, 6, or 7 from the list.
Use the Right navigation key to scroll and highlight PC-Port Untag
All check box. Press the Enter key to switch this item on and off.
The PC-Port Untag All option appears dimmed if Disable Data
802.1Q check box is selected.
Use the Right navigation key to scroll and highlight Cached IP
check box. Press the Enter key to switch this item on and off.
Use the Right navigation key to scroll and highlight the Enable PSK
SRTP check box. Press the Enter key to switch this item on and off.
The SRTP media encryption feature provides encrypted media. A
preshared secret is embedded in the Nortel IP Phone to generate
and to exchange encryption parameters without any Call Server
involvement.
For further information about the SRTP media encryption feature,
"SRTP media encryption" (page
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
Installation and configuration 367
433).