Changing The Tn Of An Existing Ip Softphone 2050; Removing An Ip Softphone 2050 From Service - Nortel 1110 Fundamentals

Changing the TN of an existing IP Softphone 2050

This procedure is required for a new user of the IP Softphone 2050
application.
Procedure 50
Changing the TN of an existing IP Softphone 2050
Step
1
2
3
4

Removing an IP Softphone 2050 from service

Procedure 51
Removing an IP Softphone 2050 from service
Step
1
2
Copyright © 2003–2007, Nortel Networks
.
Action
Exit the IP Softphone 2050 application.
Restart the IP Softphone 2050 application.
If the node password is not configured, or is configured but disabled,
go to step 3.
If the node password is configured and enabled for the node, go to
step 4.
During startup, the IP Softphone 2050 registers again with the TPS,
and the IP Softphone 2050 displays the existing node number and
TN for approximately five seconds.
If the password is configured and enabled for the node, the node
number and password prompt displays for approximately 5 seconds;
enter the correct password within this 5-second period.
If the user activates the Clear soft key during the 5-second period,
the existing node and TN are cleared and the user is prompted for
new parameters.
Action
Exit the IP Softphone 2050 application.
Uninstall the IP Softphone 2050 application from the PC using the
Windows Add/Remove Programs.
In LD 11, enter OUT at the TN prompt.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
Removing an IP Softphone 2050 from service 237
—End—
—End—