Tftp Configuration - Nortel 1110 Fundamentals

520 Appendix G Bluetooth wireless technology
TFTP configuration
Use
Phone 1140E" (page 520)
IP Phone. The IP Phone 1140E is used as an example.
Procedure 129
Enabling Bluetooth wireless technology on the IP Phone 1140E
Step
If the TFTP server is configured and running, skip to
Phone 1140E with the TFTP Server IP address.
1
2
3
Copyright © 2003–2007, Nortel Networks
.
Procedure 129 "Enabling Bluetooth wireless technology on the IP
Action
Add the [DEVICE_CONFIG] section to the 1140e.cfg file.
Create the device configuration file. This file must have the
same name as that specified for the FILENAME parameter in the
[DEVICE_CONFIG] section of the 1140e.cfg file. See
"Sample of the 1140eDEV.cfg file" (page
Figure 74
Sample of the 1140eDEV.cfg file
The device configuration file (1140eDEV.cfg) enables Bluetooth
wireless technology if ENABLE_BT 1 is present. If ENABLE_BT 0
is present, Bluetooth wireless technology is disabled.
"Sample of the 1140E.cfg file" (page 521)
1140e.cfg file with the FW and the ENABLE_BT line.
It is also possible to use the 1140e.cfg file with only the
[DEVICE_CONFIG] section for the control of Bluetooth wireless
technology. Figure 76 "Sample of the DEVICE_CONFIG file with
only the [DEVICE_CONFIG] section" (page 521)
of the 1140e.cfg file with only the [DEVICE_CONFIG] section.
If only the [DEVICE_CONFIG] version is used, you must add the
[FW] section before the BootC FW recovery is used. Otherwise, the
BootC FW download fails and the IP Phone reverts to the BootC
TPS download screen.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
to enable Bluetooth wireless technology on the
ATTENTION
step 5 to configure the IP
Figure 74
520).
Figure 75
shows an example of the
shows an example