Nortel 1110 Fundamentals page 528

528 Appendix G Bluetooth wireless technology
2
3
4
Use
Bluetooth wireless technology headset.
Procedure 132
Unpairing a wireless headset
Step
1
2
3
4
Copyright © 2003–2007, Nortel Networks
.
Press the Left/Right navigation key to select the Use BT headset
item.
A check mark indicates that the wireless headset is used. This
option is on ( ) by default.
To switch between a wired headset and a wireless headset, do one
of the following
• Press the Enter key to clear the check box and to use the wired
headset.
• Press the Enter key to select the check box and to use the
wireless headset.
Press the Exit soft key to exit to the main display.
Procedure 132 "Unpairing a wireless headset" (page 528)
Action
Double-press the Headset key to open the 3. Bluetooth Setup
dialog box.
Press the Right navigation key to select the Paired: item.
Choose one of the following
•
If your headset is displayed in the Paired box, proceed to step 5.
• If more than one device is paired, and your headset is not already
displayed in the Paired box, do the following
— Press the Right navigation key one or more times to highlight
the Paired: box. Press the Enter key to open edit mode.
— Press the Up/Down navigation keys to open the list. Press
the Up/Down navigations key to scroll in the list and highlight
your headset.
— Press the Enter key to select the headset and close the box.
Press the Enter key to exit edit mode.
Press the Right navigation key one or more times to highlight the
UnPair button (next to the UnPair Device item).
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
—End—
to unpair the