Installing Or Upgrading The Ip Softphone 2050 - Nortel 1110 Fundamentals

232 Nortel IP Softphone 2050
8

Installing or upgrading the IP Softphone 2050

Use the following options to obtain the latest version of the IP Softphone
2050
•
•
IP Softphone (Version 1) and IP Softphone (Version 2) can coexist on a PC,
although both versions cannot run at the same time.
Before performing a new installation or an upgrade, check the version of IP
Softphone 2050 software.
Before you upgrade an IP Softphone 2050, record the information found in the
Server window. This information may required in the future.
Use
installation)" (page 232)
Procedure 44
Installing the IP Softphone 2050 on the PC (new installation)
Step
1
2
3
4
5
6
Copyright © 2003–2007, Nortel Networks
.
For more information about using partial DHCP, see
"Installing an IP Phone 2004 for the first time using DHCP" (page
122).
Click Apply.
new installation—installing the IP Softphone 2050 for the first time
upgrade—upgrading the IP Softphone 2050 to the latest version
Procedure 44 "Installing the IP Softphone 2050 on the PC (new
Action
Insert the CD-ROM disk into the CD-ROM drive of your PC.
Installation should proceed automatically. If it does not, then
continue with step 2, otherwise go to step 5.
Double-click the My Computer icon.
Double-click the CD icon.
Double-click the Setup icon.
Follow the instructions on-screen to complete the installation.
Select Start > Progra ms > Nortel > IP Softphone 2050 to start the
IP Softphone 2050 application.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
—End—
ATTENTION
for a new installation of the IP Softphone 2050.
Procedure 19