Nortel 1110 Fundamentals page 519

When the Bluetooth wireless technology setting is Yes or No, the value
received from the TFTP Device Config file is saved but is not used. The
Bluetooth wireless technology administration setting is forced enabled, or
disabled respectively regardless of the value received in the TFTP Device
Config file. If the setting is then changed back to Auto, the saved value takes
effect if no further setting is received through the TFTP server.
Procedure 128
Configure the Bluetooth wireless technology administration setting
Step
1
2
3
4
5
6
7
8
9
The new mode takes affect when the IP Phone restarts. If the administrative
control enabled Bluetooth wireless technology on the phone, the item 3.
Bluetooth Setup appears in 1. Preferences submenu.
After setting administrative control, it is recommended that the Partial Menu
Lock feature be activated to prevent users from changing the administration
setting. For further information about the Partial Menu Lock feature, see
Appendix "Configuring the Local Tools menu" (page
Copyright © 2003–2007, Nortel Networks
.
Action
Double-press the Services key.
Press 3 on the dialpad to access the Network Configuration menu
or use the Up/Down navigation keys to scroll and highlight the
Network Configuration option.
Use the Right navigation key to navigate to the Enable Bluetooth
box. The current setting is displayed.
Press Enter to start the edit mode.
Use the Down navigation key to open the list.
Use the Up/Down navigation keys to scroll and highlight the desired
Bluetooth wireless technology mode.
Press Enter to select the mode and to close the list.
Press Enter to exit the edit mode.
Press the Apply&Reset soft key to save the change and to restart
the phone.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
—End—
459).
Description 519