Nortel 1110 Fundamentals page 159

4
Copyright © 2003–2007, Nortel Networks
.
a cached IP address if the IP Phone cannot connect to the DHCP
server and obtain an IP address.
Select Partial or Full DHCP.
a. If you select Full DHCP, then the following parameters are
retrieved from the DHCP server:
• a valid IP Audio Conference Phone 2033 IP address
• a subnet mask
• the default Gateway for the IP Audio Conference
Phone 2033 on the LAN segment to which it connects
• the S1 IP (the primary CS 1000 node IP address of the IP
Phone)
• the S1 action
•
the S1 retry count (this is the number of times the IP Audio
Conference Phone 2033 attempts to connect to the server)
• the S2 IP (the secondary CS 1000 node IP address of the
IP Phone)
• the S2 action
• the S2 retry count
b. If you select Partial DHCP, then you must enter the following
parameters
Screen prompt
S1 IP
S1 Port
S1 action
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
Installation and configuration 159
Description
The primary CS 1000 node IP
address of the IP Audio Conference
Phone 2033.
This is a fixed value: 4100.
Choose one of the following:
• for TPS only, enter 1.
• for TPS and Secure Media
Controller, enter 6 or 1.
For more information about
Secure Media Controller,
see Secure Multimedia
Controller Implementation Guide
(NN43001-325).