Nortel 1110 Fundamentals page 288

288 Nortel IP Phone 1110
Copyright © 2003–2007, Nortel Networks
.
Screen prompt
Duplex (0-A, 1-F, 2-H)
Data 802.1Q (0-N, 1-Y)
Data VLAN? (0-N, 1-Y)
Data VLAN Cfg? (0-Auto, 1-Man)
Data VLAN ID:
Data pBits (0-7, 8-Au)
PCUntagAll? (0-N, 1-Y)
PSK SRTP? (0-No, 1-Yes)
GARP Ignore? (0-No,1-Yes)
The IP Phone 1110 supports remote firmware upgrades through a
TFTP process and an automated UFTP process.
You are prompted to enter the TFTP Server IP address if you are
using a TFTP Server to download the current firmware.
The method to upgrade the firmware depends on the following Call
Server software
• For CS 1000 Release 4.0, the TFTP Server is required to
download the current firmware. Enter the TFTP Server IP
address at the prompt.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
Description
Default 1 (for Auto).
0 = Auto
1 = Full
2 = Half
You are not prompted for Duplex
if PC Port is set to 0 for Off and if
Speed is set to 0 for Auto.
You are not prompted for Data
802.1Q if PC Port is set to 0 for
Off.
Default 0 (for No).
You are not prompted for Data
VLAN if PC port is set to 0 for Off.
Default 1 (for Man)
You are not prompted for Data
VLAN Cfg if LLDP or Data VLAN
are not enabled and PC Port is
set to 0 for Off.
If you select 0 (for Auto), VLAN
ID is automatically configured to
the value received in the VLAN
NAME TLV.
You are not prompted for Data
VLAN ID if Data VLAN is set to 0
for Auto.
Default 8 (for Au).
You are not prompted for Data
pBits if the PC Port is set to 0 for
Off or if 802.1Q is not enabled.
Default 0 (for No).
Default 0 (for No).
Default 0 (for No).