Nortel 1110 Fundamentals page 509

4
5
6
7
Copyright © 2003–2007, Nortel Networks
.
Figure 71
Network Diagnostic Tools screen
Enter an IP address or use the Up/Down navigation keys to scroll
down through the IP addresses.
The number of repetitions of the Ping command is shown in the top
bar of the screen. The default is 4.
To change the number of repetitions, use the arrow keys to select
the number and enter a new value using the dialpad.
The number of hops for the Tracert command is shown in the top
bar of the screen. The default is 30.
To change the number of hops, use the arrow keys to select the
number and enter a new value using the dialpad.
Press the Ping soft key to have the IP Phone attempt to access
the IP address, up to the number of times shown on the top of the
screen.
The IP Phone displays the following
Pinging x.x.x.x with 64 bytes
(where x.x.x.x is the entered IP address)
The Return soft key changes to Stop and the other soft keys
become blank.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
Graphic-based diagnostics utilities 509