Nortel 1110 Fundamentals page 125

Copyright © 2003–2007, Nortel Networks
.
Screen prompt
S2 PK
Cfg XAS? (0-No,1-Yes)
XAS IP:
Speed (0-A, 1-10, 2-100)
Duplex (0-A, 1-F, 2-H)
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
Installation and configuration 125
Description
To manually configure the PK,
set the Action Byte to 6. After
you enter the PK, apply the
changes and then change the
Action Byte to 1, if required.
Default is ffffffffffffffff.
The Private key of the alternate
Secure Media Controller to
which the IP Phone connects.
If you use a Secure Media
Controller, enter a 16-digit
hexadecimal number.
To enter ALPHA digits from A to
F, enter the following:
#1 = A
#2 = B
#3 = C
#4 = D
#5 = E
#6 = F
Default 1 (for Yes).
If no External Application Server
(XAS) is present, enter 0 (for
No). You are not prompted to
enter the XAS IP address.
Enter the IP address of the XAS
server.
Network interface port speed.
Default 0 (for Auto)
0 = Auto
1 = 10 BT
2 = 100 BT
You are not prompted for Speed
if PC Port is set to 0 for Off.
Default 1 (for Auto).
0 = Auto
1 = Full
2 = Half
You are not prompted for Duplex
if PC Port is set to 0 for Off or if
Speed is set to 0 for Auto.