Nortel 1110 Fundamentals page 123

7
Copyright © 2003–2007, Nortel Networks
.
address if the IP Phone cannot connect to the DHCP server and
obtain an IP address.
Select Partial or Full DHCP.
a. If you select Full DHCP, then the following parameters are
retrieved from the DHCP server:
• a valid IP Phone 2004 IP address
• a subnet mask
• the default Gateway for the IP Phone 2004 on the LAN
segment to which it connects
• the S1 IP (the primary CS 1000 node IP address of the IP
Phone)
• the S1 Action
•
the S1 retry count (this is the number of times the IP Phone
attempts to connect to the server)
• the S2 IP (the secondary CS 1000 node IP address of the
IP Phone)
• the S2 Action
• the S2 retry count
• the External Application Server (XAS) IP address
b. If you select Partial DHCP, then you must enter the following
parameters:
Screen prompt
S1 IP
S1 Port
S1 action
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
Installation and configuration 123
Description
The primary CS 1000 node IP
address for the IP Phone 2004.
This is a fixed value: 4100.
Choose one of the following:
• for TPS only, enter 1.
• for TPS and Secure Media
Controller, enter 6 or 1.
For more information about
Secure Media Controller,
see Secure Multimedia
Controller Implementation
Guide (NN43001-325).