Nortel 1110 Fundamentals page 405

19
20
21
22
23
24
Copyright © 2003–2007, Nortel Networks
.
S2 IP—the secondary CS 1000 node IP address for the IP Phone
1150E
The IP Phone 1150E can support a primary (S1) and secondary
(S1) connect server. If you require IP Phones to register on multiple
nodes, see IP Line Fundamentals (NN43100-500)
Use the Right navigation key to scroll and highlight Port. Press
the Enter key to start the edit mode. Use the dialpad to fill in the
information.
Port—same as S1 port
Use the Right navigation key to scroll and highlight S2 Action.
Press the Enter key to start the edit mode. Use the dialpad to fill in
the information. Choose one of the following
•
for TPS only, enter 1
• for TPS and Secure Media Controller, enter 6 or 1
For more information about Secure Media Controller, see Secure
Multimedia Controller Implementation Guide (NN43001-325).
Use the Right navigation key to scroll and highlight Retry. Press
the Enter key to start the edit mode. Use the dialpad to fill in the
information.
Retry—same as S1
Use the Right navigation key to scroll and highlight S2 PK.
S2 PK—the Private key of the alternate Secure Media Controller to
which the IP Phone connects.
Press the Enter key to start the edit mode.
To manually configure the PK, set DHCP to Partial or None.
S2 PK Default is ffffffffffffffff.
If you use a Secure Media Controller, enter a 16-digit hexadecimal
number.
To enter ALPHA digits, use a USB keyboard to enter the following:
# 1 = A
# 2 = B
# 3 = C
# 4 = D
# 5 = E
# 6 = F
Use the Right navigation key to scroll and highlight Ntwk Port
Speed box. Press the Down navigation key to open the list box.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
Installation and configuration 405