Nortel 1110 Fundamentals page 333

3
4
5
6
7
8
When the IP Phone restarts, the firmware reads the setting for Full Duplex
mode and sets the LAN Ethernet port, PC Ethernet port, duplex, and speed
accordingly.
Procedure 68
Disabling Auto Negotiate and enabling Full Duplex mode
Step
1
2
3
4
5
6
7
Copyright © 2003–2007, Nortel Networks
.
Use the Right navigation key to scroll and highlight the Duplex list.
Press Enter to start the edit mode.
Press the Down navigation key to open list box.
Use the Up/Down navigation keys to scroll and highlight one of the
following options
• 10BT Full—10 BT Full Duplex mode
• 100BT Full—100 BT Full Duplex mode
Press Enter to exit the edit mode.
Press the Apply&Reset soft key to save the changes and to restart
the IP Phone 1120E. The firmware settings are read and are applied
to UPLINK and the PC Ethernet Port.
Action
Double-press the Services key to open the Local Tools menu.
Press 3 on the dialpad to access the Network Configuration menu
or use the Up/Down navigation keys to scroll and highlight the
Network Configuration option.
Use the Right navigation key to scroll and highlight the Duplex box.
Press Enter to start the edit mode.
Press the Down navigation key to open list box.
Use the Up/Down navigation keys to scroll and highlight one of the
following options
• 10BT Full—10 BT Full Duplex mode
•
100BT Full—100 BT Full Duplex mode
Press Enter to exit the edit mode.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
—End—
Full Duplex mode 333