Nortel 1110 Fundamentals page 526

526 Appendix G Bluetooth wireless technology
11
12
Dual Pairing Headsets
Take special care when you use a dual pairing type of Bluetooth wireless
technology headset. This headset can be paired to its base as well as to the
IP Phone 1140E and IP Phone 1150E.
If the headset is paired to both, the IP Phone is the second device. When
you press the headset telephone key and you hear a single tone, the
headset is active for a call from the desktop IP Phone base.
Copyright © 2003–2007, Nortel Networks
.
•
If more than one device is paired, you may need to navigate to
the one you want, as follows
— Press the Right navigation key one or more times to highlight
the item in the Paired box. Press the Enter key to start the
edit mode.
— Press the Up/Down navigation keys to open the list. Press
the Up/Down navigations key to scroll in the list and highlight
your headset.
— Press the Enter key to select the headset and close the list.
Press the Enter key to exit edit mode.
Choose one of the following
• If only one headset is paired, proceed to
• If more than one wireless headset is paired, the first headset
paired is automatically made the active device.
To make a different headset active, press the Right navigation
key one or more times to highlight the Set button (next to the Set
Active Device item). Press the Enter key.
The message Set active: <device name> appears. This means
the headset named is now the active wireless headset and is
used when you press the headset key.
Press the Exit soft key to exit to the main display. Changes are
saved automatically.
Paired headset information is saved and restored when a reboot of
the IP Phone occurs; therefore, the active wireless headset remains
paired and active.
It is not recommended to pair more than one headset of the same
model because identical names will appear in the Paired list.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
step
—End—
12.