Components And Functions; Keys And Functions - Nortel 1110 Fundamentals

Components and functions

This section describes the following components of the IP Phone 1120E
•
•
•

Keys and functions

Table 40 "IP Phone 1120E keys and functions" (page 305)
functions for the IP Phone 1120E.
Table 40
IP Phone 1120E keys and functions
Key
Hold
Goodbye
Visual Alerter/Message
waiting indicator
Feature Status Lamp
indicator
Self-labeled line/programm
able feature keys
Context-sensitive soft keys
Fixed feature keys
Expand
Copyright © 2003–2007, Nortel Networks
.
Keys and functions
Services menu
Local Tools menu
Function
Press the Hold key to put an active call on hold. Press the line (DN)
key beside the flashing LCD to return to the caller on hold.
Press the Goodbye key to terminate an active call.
When a message is waiting, the red Visual Alerter/Message waiting
indicator lights. Also, when the ringer sounds, this indicator flashes.
When the firmware is updating, the blue Feature Status Lamp
indicator flashes.
This function requires server support and, therefore, is not available
on all phones.
Self-labeled line/programmable feature key labels are configured for
various features on the IP Phones.
A steady LCD light beside a line (DN) key indicates the feature or
line is active. A flashing LCD indicates the line is on hold or the
feature is being programmed.
Context-sensitive soft keys are located below the display area. The
LCD label above the key changes, based on the active feature.
A triangle before a key label indicates that the key is active.
Use these keys to access non-programmable standard features.
The Expand key is used to access an External Application Server
such as, Nortel Application Server.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
Components and functions 305
lists the keys and