Nortel 1110 Fundamentals page 55

8
Copyright © 2003–2007, Nortel Networks
.
Enter the following parameters:
802.1Q (0-No, 1-Yes)
Data VLAN? (0-N, 1-Y)
Voice VLAN (0-N, 1-Y)
VLAN Cfg? (0-Auto, 1-Man)
LLDP-MED? (0-N, 1-Y)
LLDP VLAN? (0-No, 1-Yes)
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 01.02 Standard
Release 5.0 20 June 2007
Installation and configuration 55
Default 1 (for Yes).
You are not prompted for 802.1Q
if LLDP is not enabled.
Default 0 (for No).
VLAN settings on the PC port of
the IP Phone 2001 is used for the
initial DHCP discovery and not for
PC traffic, because the IP Phone
2001 does not have a PC port.
Default 0 (for No).
You are not prompted for Voice
VLAN if 802.1Q is not enabled.
Default 0 (for Auto).
0-Auto
Automatically obtains VLAN ID
using DHCP, or the 802.1ab data
switch.
1-Man
Enter the VLAN ID manually. This
is a number from 1 to 4094.
You are not prompted for VLAN
Cfg if Voice VLAN is not enabled.
Default 0 (for No).
If you select 1 (1 for Yes), VLAN
ID is configured automatically to
the value received in the Network
Policy TLV.
You are not prompted for
LLDP-MED if VLAN is not set to
Auto (2-Auto,) or if LLDP is not
enabled.
Default 0 (for No).
If you select 1 (1 for Yes), VLAN
ID is configured automatically to
the value received in the VLAN
NAME TLV.
You are not prompted for LLDP
VLAN if VLAN is not set to Auto (2-
Auto), or if LLDP is not enabled.