Installation Overview - Nortel 1120E Administration Manual

•
•
•
•
•
The IP Phone 1120E Getting Started Card included in the box with the IP
Phone 1120E also contains useful information and explains how to:
•
•
•
•
•
•
•

Installation overview

To install the IP Phone 1120E with SIP Firmware, three basic steps are
required.
Procedure 1
Installation overview
Step
1
2
3
Copyright © 2008, Nortel Networks
.
access and use the call inbox and call outbox
configure and use instant messaging
receive, identify, answer, redirect, decline, or ignore an incoming call
operate hold, three-way calling, call transfer, and call park
use other features such as speed dial, call forward, do not disturb, and
setting up conference calls
Note: All features are not available with all call servers.
connect the AC power adapter
control the volume when answering a call
make a call using the handset
make a call with the headset or using handsfree
use hold and mute
set the contrast
set the language
Action
Configure the provisioning server and, optionally, the DHCP server.
The function of the provisioning server is to provide configuration
options to every IP Phone 1120E throughout the network. The DHCP
server can be configured to provide basic network-configuration data
or a more comprehensive set of network-configuration data for the
IP Phone 1120E with SIP Firmware.
Load SIP Firmware on the IP Phone 1120E.
Configure the initial network-configuration parameters on the IP
Phone 1120E with SIP Firmware.
SIP Firmware Release 1.1 for IP Phone 1120E Administration
NN43112-300 02.03 Standard
—End—
27 May 2008
Introduction 17