Configuring Secure Local Menu Through Full Dhcp; Accessing The Local Tools Menu; Key Number Assignments - Nortel 1110 Fundamentals

Configuring Secure Local Menu through Full DHCP
Password protection is enabled during Full DHCP configuration if the
SECUREMENU parameter, or the PARTSECURE parameter are present at
the end of the S4 part of the Full DHCP string. If neither the SECUREMENU
parameter, nor the PARTSECURE parameter is present, password
protection is not enabled.
The SECUREMENU/PARTSECURE item is an optional parameter. If it is
present, then the full S4 string needs to be present, including the action
and retries. The S4 string is already present if the XAS support has been
configured through the DHCP. If XAS is not configured, you can still enable
password protection by setting the S4 IP address to 0.0.0.0 and by setting
the other fields to 0.

Accessing the Local Tools menu

After you enter the password, the Local Tools menu remains active for 5
minutes. You can freely navigate, exit and reenter the Local Tools menu
without being prompted to reenter the password. To reset the timer before
the 5-minute time expires, double-press the Services key.
You can also press the 5 key to select the Lock Now item from the Lock
Menu. The Lock Now item immediately exits the Local Tools menu, closes
any open Local Tools menu pages, and locks the Local Tools menu.
Alternatively, when time expires, the Local Tools menu and any open
submenus are closed. Double-press the Services key to open the password
prompt window to reaccess the Local Tools menu.
If you enter an incorrect password, the Local Tools menu does not open.
Double-press the Services key to open the password prompt window. Only
three incorrect password entries are allowed. Any entry after the three
attempts is ignored for 5 minutes. The password prompt window is visible
and you can reenter the password but the password is not processed until
the 5-minute time expires.
Some text appears dimmed depending on the current state of the menu lock
and the configuration of the IP Phone. Only configuration options that are
enabled from the current state appear active. Menu options that are not
available appear dimmed.
For more information about configuring the Local Tools menu for the IP
Phone 2007, see

Key number assignments

Key numbers 1 to 15 are used for Programmable line (DN)/feature keys.
These keys can be any DN or feature except for Message Waiting and those
configured on keys 17 to 26.
Copyright © 2003–2007, Nortel Networks
.
Appendix "Configuring the Local Tools menu" (page
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
Key number assignments 179
473).