Installation And Configuration; Before You Begin; First-Time Installation; Startup Sequence - Nortel 1110 Fundamentals

70 Nortel IP Phone 2002
7-ft. Cat5 Ethernet cable
Handset, Ethergray
Handset, Charcoal
Handset cord, Ethergray
Handset cord, Charcoal
Footstand, Charcoal (used for Ethergray and Charcoal models)
IP Phone 2001/2002/2004 Power Adaptors
Power transformer (117/120 VAC 50/60 Hz) (North America)
Power transformer 3-prong AC to AC, direct plug-in, 8 W, 240 VAC,
50 Hz to 16 VAC at 500 mA (Ireland and UK)
Power transformer AC to AC, direct plug-in, 8 W, 230 VAC, 50/60 Hz,
to 16 VAC at 500 mA (Europe)
Power transformer 2-prong wall plug direct plug-in AC to AC, 8 W,
240 VAC, 50 Hz, to 16 VAC at 500 mA (Australia and New Zealand)
Power transformer AC to AC, direct plug-in, 8 W, 100 VAC, 50 Hz, to
16 VAC at 500 mA
For more information, and for information about previous versions of the IP
Phone, contact Nortel.
Installation and configuration
The following sections provide a step-by-step guide to install and configure
the IP Phone 2002:
•
•
•
•
•

Before you begin

Before installing the IP Phone 2002, complete the following pre-installation
checklist:
•
Copyright © 2003–2007, Nortel Networks
.
"Before you begin" (page 70)
"First-time installation" (page 71)
"Configuring the IP Phone 2002" (page 71)
"Startup sequence" (page 74)
"Installing the IP Phone 2002" (page 74)
Ensure one IP Phone 2002 boxed package exists for each IP Phone
2002 you install. The package contains:
— IP Phone 2002
— handset
— handset cord
— 2.1 m (7-ft) CAT5 Ethernet cable
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
A0648375
A0788874
A0758634
A0897725
N0000763
A0891619
A0619627
A0656598
A0619635
A0647042
A0828858